Yardsale

My wife has decreed that I have too much stuff. So reluctantly, I'll be adding new items here that relate to woodworking in some way to pass on high quality tools to folks that can use them. Rest assured that anything you see here is 100% up to snuff and will serve as intended. Issues will be noted. Most items will ship for the regular flat rate shipping, but some items may ship at exact cost if they are very heavy or otherwise require special packaging or handling. If you have a question, you can send an email through the site, or contact me on Instagram. Most items are the only one there is, so if it strikes your fancy, claim it before its gone.




Product Image Item Name- Price
YS1 Stanley #40 Scrub Plane

YS1 Stanley #40 Scrub Plane

A nice clean example of one of Stanley's most popular tools. Used to dress rough lumber prior to a smooth plane, this example has about 90% original...
$80.00

... more info
Sold Out

YS2 Stanley #78 Duplex Filletster and Rabbet Plane

YS2 Stanley #78 Duplex Filletster and Rabbet Plane

A very handy plane for putting rabbets on the edge of boards or the ends for that matter. These planes are very common, but what is uncommon is to...
$85.00

... more info
Sold Out

YS3 Sandusky Beech Handled Plow

YS3 Sandusky Beech Handled Plow

Here is a pretty nice Sandusky Handled Plow. Body is of beech but the arms and nuts are of boxwood. Nuts run free on the arms and there is extremely...
$150.00

Add:

YS4 Plated English Brace

YS4 Plated English Brace

Here is an exceptional example of a plated English Brace, made in Sheffield. So called because the wooden body is plated with brass plate which...
$120.00

Add:

YS5 Saw Jointer

YS5 Saw Jointer

Here is a nice example of a saw jointer. This one has a unique feature in that it has opposing screws on either side that allow you to use different...
$35.00

... more info
Sold Out

YS6 All Iron Fray 8" Sweep Brace

YS6 All Iron Fray 8" Sweep Brace

This Spoffard style brace is unique in the way it hold the bit in that the frame is split, and it grabs the tang of the bit and is secured by a large...
$40.00

... more info
Sold Out

YS7 Fray 8" Sweep Brace with Rosewood Pad and Grips

YS7 Fray 8" Sweep Brace with Rosewood Pad and Grips

Another interesting brace made by Fray of Bridgeport, CT. This example has a split frame but uses a threaded collar to tighten around the bit which...
$60.00

Add:

YS8 Millers Falls Model 732 Brace with 10" Sweep

YS8 Millers Falls Model 732 Brace with 10" Sweep

This is a standard style modern brace made by Millers Falls. It has a ratcheting chuck that can be frozen or made to work clockwise or counter...
$40.00

Add:

YS9 Millers Falls Model 731 Brace with 12" Sweep

YS9 Millers Falls Model 731 Brace with 12" Sweep

This is a standard style modern brace made by Millers Falls. It has a ratcheting chuck that can be frozen or made to work clockwise or counter...
$40.00

Add:

YS10 Veritas Mark 2 Honing Guide

YS10 Veritas Mark 2 Honing Guide

This is an excellent honing guide, I use one myself. This comes complete as new, saw very limited use. New Costs $105, a great buy for someone that...
$75.00

Add:

YS11 Woodcraft Iron Holdfast

YS11 Woodcraft Iron Holdfast

For those who like to use Holdfasts, this item is for you. No longer in production, this ductile iron holdfast has a lot of nice features. The tang...
$40.00

Add:

YS12 Early Justus Traut Rosewood Mortise Gauge

YS12 Early Justus Traut Rosewood Mortise Gauge

Here is an early production, presumably Stanley, marking gauge of rosewood. It is used to mark out mortice and tenon joints. Its stamped with an Oct...
$35.00

Add:

YS13 Marples #153 Mortise Gauge

YS13 Marples #153 Mortise Gauge

Here is a virtually new, Marples mortise gauge. This one has the usual double and single point arrangement. The double point is adjusted via slider...
$20.00

Add:

YS14 Russell Jennings Bit set in Original Bifold Oak Box

YS14 Russell Jennings Bit set in Original Bifold Oak Box

This set of bits is the much less common of those seen in the wild. These bits range from 1/4" to 1" in 1/16" increments and are stored in a bifold...
$130.00

Add:

YS15 Russell Jennings Complete Bit set in Three Fold Oak Box

YS15 Russell Jennings Complete Bit set in Three Fold Oak Box

Here is a good example of a complete bit set by Russell Jennings with sizes running from 1/4" to 1" in 1/16" increments. These bits have the fine...
$100.00

Add:

YS16 Veritas Mark 2 Camber Edge Roller Assembly

YS16 Veritas Mark 2 Camber Edge Roller Assembly

This attachment which goes with the current Veritas Mark 2 Honing guide allows the uses to hone a cambered edge on a plane blade which is very handy...
$20.00

Add:

YS17 Fray No 108 Brace

YS17 Fray No 108 Brace

Yet another brace made by John Fray of Bridgeport, CT. This model 108 has an 8" sweep. The rosewood pad and grip are in great shape, iron frame has...
$50.00

... more info
Sold Out

YS18 3/8" Sandusky Tool Dado Plane

YS18 3/8" Sandusky Tool Dado Plane

A very nice example of a 19th century 3/8" Dado plane. These usually are twisted and cracked, this one is as straight as the day it was made. A very...
$90.00

Add:

YS19 Auburn Tool 3/4" Dado Plane

YS19 Auburn Tool 3/4" Dado Plane

Back in the day, when this plane was made, companies sometimes used prisoners locked up in the joint to make their wares. Auburn was one such...
$85.00

Add:

YS21 Lie Nielsen 4 1/2 Bench Plane

YS21 Lie Nielsen 4 1/2 Bench Plane

A perfect example of the Lie Nielsen #4 1/2. This heavy smoother was originally conceived by Stanley to compete with the high quality stuffed infills...
$300.00

... more info
Sold Out



Your IP Address is: 3.138.175.10
Copyright © 2024 Vintage Saws. Powered by Zen Cart